Leaky pipes are more than annoying. It can lead to serious damage if it isn’t treated. After detection, it is important to call the plumber. If the plumber isn’t available immediately, you can look at what to do while you wait.
Is it possible to pinpoint the source of the leak? A leak from above is not always indicated by water on the floor below a sink, toilet or other fixture. The leak could be from somewhere else, or the water may have moved to another location.
Look out for signs other than a drip or puddle. These could include:
- A damp spot on the ceiling or wall. Hidden leaks that aren’t visible from the ceiling or wall may not always be obvious. To find the source, look for dampness in plaster or drywall.
- Musty smell Untreated leaks can cause mildew or mold damage. It can also cause a musty odor.
- Broken pipes. A long-term leak may be indicated by corrosion or rust on the pipes’ exteriors.
- Bubblegum wallpaper or peeling paint . Other signs that a leak is hidden behind the wall include bubbling paint or peeling wallpaper.
Once you have located the leak, you are ready to move on to the next steps. If you have already called the plumber, you can read the following to learn what you should do while you wait for him to fix the problem.
Turn off the water
Turn the water supply valve on the fixture to the off position. If the valve is not visible or it isn’t there, you can turn off the main water supply.
You won’t need to worry about your home being affected by the leak if there isn’t a constant flow of water. This won’t fix the problem but it will reduce the chance of any further damage. You can turn off the fixture’s power supply, or shut off your main valve at home. Make sure there is no water flow. To test your handwork, run the water. You can’t wait to have the plumber inspect the fixture, sink, or shower.
Do Not Use the Fixture
Leakage doesn’t just happen in water supply lines. Leakage in the drainpipe could cause water problems whenever you use a sink or toilet, or any other fixture or appliance.
Turning off the water supply will not stop a leaky drain. This tactic won’t stop you or your family from using the fixture but it will not directly affect the drain. The best way to temporarily stop a leaky drainpipe is to not use the appliance or fixture.
Clean the Pipe
You won’t see any additional leaks if there isn’t water passing through the pipe. However, this does not mean that the pipe is completely dry. Wipe the pipe completely dry if there are visible drips. This will not only prevent corrosion and mold growth from occurring, but also prepare the area for repair.
Insure the Damage
You can either cover the area while you wait, regardless of whether the leak is caused by wear and tear, damage or loose joints. This will not completely repair the leak. It can help prevent further damage from occurring in the near future. Do not worry about a permanent solution right away.
Although plumbing putty or epoxy may temporarily fix the problem, these products don’t cost extra. Wrap the pipe with duct tape or a towel instead.
Is your plumbing system leaking? For more information, contact Clog kings today
This post was written by Joey Denick. Joey is the Owner and Operator of Clog Kings. At Clog Kings, LLC, we pride ourselves on our dedication and efficiency. We know you don’t have time to waste. That’s why we work fast to get your home or commercial building back up and running in no time. If you are looking for Plumbers in Zephyrhills FL then look no further because we got you covered!